Led Information Concerning The Radiation Emitted; Installation And Initial Operation; Transport; Unpacking - Heraeus translux power blue Gebrauchsanweisung

Function
Display of battery minimum
level, remaining energy is
suffi cient for 6 cycles.
Display of empty battery.
Display overheating protec-
tion system activated.
4.2.4

LED information concerning the radiation emitted

This device uses high-luminosity LEDs, Class 2M (IEC 60825-1)
DANGER!
Diverging beams
Do not observe the emission of light from the LED using optical instruments
such as monocles, magnifying glasses or microscopes from a distance of less
than 100 mm as this could cause a risk of damage to your eyes.
DANGER!
Collimated beams
Do not observe the emission of light from the LED using optical instruments
designed for use at a distance, such as telescopes or binoculars, since this
could cause a risk of damage to your eyes.
Labels are provided on the packaging of the device, as indicated in the fi gure
here above.
5

Installation and initial operation

5.1

Transport

Transport the machine carefully in a horizontal position. Do not let the machine be exposed
to shaking or vibrations! For sizes and weight see paragraph 11 (Technical data).
5.2

Unpacking

After unpacking, check that the delivery is complete, i.e. the unit and all accessories are
present, and dispose of the packaging material in accordance with local environmental
regulations.
Button operation
Button pressed for
polymerisation "Fast"
or "Slow rise".
Acoustic signal
2 beeps at end of exposure cycle.
2 beeps – no light emission.
3 beeps during the exposure cycle,
interruption of operation.
LED Radiation.
Do not stare into the beam or view
directly with optical instruments.
• Class 2M LED Product.
• IEC 60825-1:1993 + 1997 + A2:2001.
• EN 60825-1:1994 + 2002 + A2:2001.
• Max. power 11.30 mW.
• Dominant wavelenght
Min. 440 – Max. 465 nm.
Translux x
®
Power Blue ®
GB
- 11 -