Medtronic Affinity CP BBAP40 Gebrauchsanweisung Seite 22

Maximum outlet pressure:
Maximum pump speed:
Compatible systems:
12.1. Storage and Transport Environment
Temperature:
Humidity:
13. Specifications for the Affinity™ CP Adapter
Part number:
Compatible pump:
Compatible systems:
Maximum adapter speed:
IP rating:
13.1. Gross Dimensions
Weight:
Height:
Diameter:
13.2. Storage and Transport Environment
Temperature:
Humidity:
Atmospheric pressure:
13.3. Operating Environment
Temperature:
Humidity:
Atmospheric pressure:
14. Flow Rate of Affinity™ CP Centrifugal Blood Pump with Balance™ Biosurface
Note: The actual obtainable flow is dependent on afterload of the pump which results from the extracorporeal circuit components
and the patient's arterial resistance.
Note: Pressure drop is the difference between the outlet of the pump and the inlet of the pump.
20 Instructions for Use
700 mm Hg (93.3 kPa)
■
4000 rpm (with Medtronic external motor drive 560A)
■
3600 rpm (with Affinity CP adapter on Stöckert and Sorin centrifugal pump systems or
Sarns and Terumo centrifugal systems)
Medtronic speed controller systems (with external motor drive model 560A, emergency
handcrank model HC150A)
-30°C to 50°C (-22°F to 122°F)
20% to 85% noncondensing
AP40AST
Affinity CP centrifugal blood pump with Balance biosurface (BBAP40)
■
Stöckert and Sorin centrifugal pump systems (with drive unit models 60-01-04 and
60-01-00 and emergency drive unit models 60-01-35 and 60-01-50)
■
Sarns and Terumo centrifugal systems (drive unit model 164267 and manual drive unit
model 164268)
3600 rpm
IP47
315 g (0.69 lb)
28 mm (1.1 in)
94 mm (3.7 in)
-30°C to 70°C (-22°F to 158°F)
15% to 93% noncondensing
70 kPa to 106.3 kPa
10°C to 40°C (50°F to 104°F)
20% to 75% noncondensing
70 kPa to 106.3 kPa
English