Therapy Setting Options And Defaults - DeVilbiss SmartLink-System Bedienungsanleitung

AppenDix
Study Setup
Device Settings tab
Standard and AutoAdjust models
Respiratory Event Detection tab
AutoAdjust models onLY

therapy Setting options and Defaults

therapy Settings tab
Standard models and AutoAdjust models in CPAP mode
Setting option
Pressure Unit
CPAP Pressure
Delay Pressure
Delay Time
Delay Time Patient Access
AutoAdjust models in AutoAdjust mode
Setting option
Pressure Unit
Upper Pressure Limit
Lower Pressure Limit
AutoAdjust Delay Time
Delay Time Patient Access
Use Split Night Delay
Split Night Delay
(only available if Use Split Night Delay is Checked)
Number of Nights
(only available if Use Split Night Delay is Checked)
Study Length
Device Settings tab:
Standard and AutoAdjust models
Setting options
LCD Language
Tubing Length
Patient Access
Enable Auto ON
Enable Auto OFF
Enable Notifications
Enable Mask Fit Check
Respiratory Event Detection tab:
AutoAdjust models onLY
Setting option
Apnea Flow Reduction
Apnea Duration
Hypopnea Flow Reduction
Hypopnea Duration
* DV5X-NE Series SleepCube devices have factory defaults of hPa for
Pressure Unit and German for LCD Language.
EN
Default Value
cmH2O *
10.0
4.0
20
Checked
Default Value
cmH2O *
15.0
5.0
20
Checked
Unchecked
240
1
7
Default
Value
English *
1.8m (6ft)
Checked
Checked
Unchecked
Checked
Checked
Default Value
10
10
50
10
A-DV5SS 29