DeVilbiss SmartLink-System Bedienungsanleitung Seite 18

EN
Assigning a Device to a Patient
You can assign a device to a patient while you are creating a patient record or a device can be assigned to a previously created patient record. Assigning
a device to a patient creates a new study.
To assign a device to a new patient, use the instructions available in
to assign a device to an existing patient:
1. Select 'All Patients' in the Patients menu.
2. Find the chosen patient in the table and select 'Assign Device' in the Options menu.
3. Click the 'Select a Device' menu and select the serial number of the chosen device OR select [New Device].
a. If you selected a serial number, go to the next step.
b. If you selected [New Device], use the instructions available in
4. When the New Study window appears, modify or accept the default settings in the Therapy Settings tab, Device Settings tab and, for the
AutoAdjust device only, the Respiratory Event Detection tab. Views of these study tabs and their default settings are available in the Appendix.
5. Select the number of days in the Study Length drop-down menu in the Therapy Settings tab.
6. Enter pertinent comments now or add comments to this study later.
7. Click SAVE
18 A-DV5SS
mAnAging recorDS
Managing Records / Creating a Patient Record
Managing Records / Creating a Study Record.
or Creating a Study Record.