Volume Navigation - Blackmagic Design Hyperdeck Shuttle Hd Installations- Und Bedienungsanleitung

Volume Navigation

Volume navigation lets you open a file path overlay so you can locate clips on media cards,
disks and network drives. When enabled, the overlay appears on the HDMI output of the
HyperDeck Shuttle HD and the LCD display of the HyperDeck Shuttle 4K Pro. Once enabled
you can navigate through directories using the scroll button, clip button and jog wheel.
1 Open the volume navigation window by pressing the scroll button marked SCR.
Press the scroll button to open the volume navigation window on the HDMI output
2 Scrub or skip through the footage on display until you find a clip from the folder you are
interested in.
3 Press the scroll button to move down through the volumes and the clip button to move up.
To close the volume navigation window press the stop button, or press 'play' to close the
window and immediately start playback.
NOTE To view clips that were recorded using a different codec, resolution or frame
rate, set your HyperDeck's codec and default standard to match.
MENU SET DISK SD
JOG SCR
CLIP
Volume Navigation 94