Blackmagic Design HyperDeck Shuttle HD Installations- Und Bedienungsanleitung Seite 47

Monitor Page 4
The fourth page of monitor contains all the settings for when using HyperDeck Shuttle 4K
Pro as a teleprompter. Any changes made will affect the layout of the teleprompter on both
the LCD display and monitor outputs. To use the teleprompter feature you will need to select
'teleprompter' from the codec options on the record tab.
Teleprompter Font Size
Adjust the size of the text by dragging the font size option left to decrease the size or right to
increase the size up to 600%.
Teleprompter Line spacing
Adjust the slider to increase or decrease the line spacing. Values range from 100% to 400%.
Teleprompter Side Margin
Adjust the widths of the side margins on both sides of the teleprompter display.
If your teleprompter monitor is set up to reflect onto glass, such as in front or a camera or at a
speakers podium, you will need to use the flip settings to make it readable for the presenter.
Flip Horizontally
Use this when the bottom of the teleprompter monitor is mounted closest to the base of
the glass.
Flip Vertically
Use this when the bottom of the teleprompter monitor is mounted away from the base of
the glass.
Settings 47