Blackmagic Design HyperDeck Shuttle HD Installations- Und Bedienungsanleitung Seite 64

Tap 'A' to enable 'auto take increment' when in 'standby' mode. This will automatically advance the take number
for each clip recorded. A small 'A' appears next to the take number on the slate when enabled. When entering
'take' metadata, prompts for additional shot types will appear to the right of the touch keyboard
Good Take
Tap the 'good take' indicator to tag good takes for easy recall in post production. This button
applies the 'good take' tag to the clip currently being viewed in 'playback' mode. If the
HyperDeck is in 'standby' mode and ready to record, the 'good take last clip' button applies a
'good take' tag to the last clip recorded.
Interior / Exterior
Tap 'interior' or 'exterior' to add a tag to the next clip in standby mode, or the current clip in
playback mode.
Entering Metadata 64