Controlling Multiple Hyperdeck Disk Recorders - Blackmagic Design Hyperdeck Shuttle Hd Installations- Und Bedienungsanleitung

This will also be the HTTPS address you use to access files via the web media manager,
for example https://hyperdeck.melbourne.com
It's worth noting that the certificate will be invalidated following a factory reset and a new
certificate will need to be generated and signed.
File Settings
When first set up, your HyperDeck Shuttle will record clips to your SD card, USB flash disk or
network location using 'HyperDeck' as the prefix. Type in a new filename to change the prefix.
The timestamp added to the filename is turned off by default. If you would like the date and
time recorded in your filename, switch it to on. Filename prefix and timestamp settings are also
available via onscreen menu on HyperDeck Shuttle.
Reset
Select 'factory reset' to restore your HyperDeck to factory settings. A factory reset will invalidate
the current certificate. If a secure certificate is being used you will need to generate a new
certificate signing request to be signed by a certificate authority or IT department.

Controlling Multiple HyperDeck Disk Recorders

If you have more than one HyperDeck disk recorder on your local network you can control
playback individually or as a group by clicking the three line icon in the lower right hand corner
of the HyperDeck Setup Utility.
Blackmagic HyperDeck Setup 104