Blackmagic Design HyperDeck Shuttle HD Installations- Und Bedienungsanleitung Seite 41

Record Page 2
Additional settings on the second record page
Trigger Record
There are two trigger record modes available, video start/stop and timecode run. Some
cameras, such as the URSA Mini, send a signal over SDI to start and stop recording on external
recorders. Tapping on 'video start/stop' will trigger the HyperDeck Shuttle 4K Pro to start or
stop recording when the record button is pressed on the camera.
You can use the time 'timecode run' option to trigger the unit to start recording when it receives
a valid timecode signal via the inputs. When the signal stops, recording will also stop. You can
disable trigger recording by tapping the 'none' option.
Select 'none' to disable trigger recording
USB Spill
If you are using a Blackmagic MultiDock 10G or similar to connect more that one drive via the
'ext disk' usb connection, turn USB Spill on. This will ensure that recording will continue from
one USB drive to the next.
Settings 41