Internal M.2 Ssd Icons And Status; Accessing The Shared Storage Over A Network - Blackmagic Design Hyperdeck Shuttle Hd Installations- Und Bedienungsanleitung

Internal M.2 SSD Icons and Status

The icon display on the upper toolbar will appear differently depending on which function has
been selected using the setup menu. When using the internal drive as a record cache, a 'cache'
icon will appear. When set to the 'network storage' function, a M.2 SSD icon will appear instead
but some of the details shown will be similar. The storage capacity of the internal M.2 SSD is
dependent on the SSD media size and the codec and resolution you are recording. When you
have a valid signal connected to the rear of HyperDeck Shuttle 4K Pro, the icon on the front
panel will display the duration available to record based on your current resolution and selected
codec. Tap on the cache icon to reveal cache time used. This is indicated by the + symbol
before the duration.
There are four different status modes for the record cache:
Standby The cache icon information will be white when the cache is in standby mode
Recording The cache icon will be red during recording and the duration indicator will reduce as
the space is filled. If you have fast storage media connected with usable space, the
duration indicator may not appear to move much as the storage media can copy files
as fast as your cache can record them. If you are using slower media or you have run
out of space, the available cache duration will decrease.
Stored If you run out of available on space on your connected storage media, the cache icon
will flash green and white until sufficient storage is connected and the information
stored on the cache is transferred over.
Transferring The cache icon will illuminate green while the cache media is being transferred to
SD card or USB-C external storage. Due to the nature of how the cache records, this
process can be very quick depending on your storage media.
If your media runs out of available storage space, the recording will continue to the
cache until the media is swapped.
When using the 'network storage' function the M.2 SSD icon will display time remaining in
hours:minutes:seconds.
The storage icon for media slot 2 in the lower toolbar will indicate red when recording and
blue when selected. For more information on the media status using the lower toolbar refer to
'storage indicators' section earlier in this manual.

Accessing the Shared Storage Over a Network

You can use your computer's file browser to access the storage over a network.
To access storage on a Mac computer:
1 Open Finder and click on 'network' in the sidebar menu of a finder window.
2
Select your HyperDeck Shuttle 4K Pro from the list.
3 You will be prompted to connect as a guest or enter a username and password. Choose
the guest option and click 'connect'.
4 A window will appear prompting you to select which volumes you want to mount. Select
'internal' and click 'OK'
Using the Optional Internal M.2 SSD 92