Blackmagic Design HyperDeck Shuttle HD Installations- Und Bedienungsanleitung Seite 86

If your shared server isn't seen by HyperDeck Shuttle 4K Pro, you can also add network
location manually using the touch screen.
To add a network location manually:
1 Tap on the storage icons in the lower toolbar on the HyperDeck Shuttle 4K Pro to open the
storage display.
2 Tap the 'network' button on the lower right hand corner of the display and tap on 'add
manually'.
3 Using the touchscreen keyboard enter the address for your network share. This might be
an IP address or the network server name.
4
Tap 'connect'. A confirmation window will appear as the connection is made. Once
connected, select your folder using the list.
Once you've mounted folders from the network they will appear in the list when selecting your
active drive. For more information on selecting an active drive, refer to 'active media' earlier in
this manual.
Storage Media 86