Date And Time - Blackmagic Design Hyperdeck Shuttle Hd Installations- Und Bedienungsanleitung

However, the default video standard is only a guide. It won't override anything. So if you had a
media disk with only 1 type of video file on it and you press play, the HyperDeck disk recorder
will switch to that video standard and play. It will ignore the default video standard because it's
obvious you just want to play the files on the disk.
It's a similar situation with recording. If you press record, the HyperDeck will just record whatever
video standard is connected to the video input. Plus, once you have done the recording, the
HyperDeck Shuttle HD will playback the same video standard files on the disk, even if there are
other files on the disk that match the default video standard. It's assumed you want to playback
the same video standard as you just recorded. If you unplug the media disk and plug it back in
again, only then will the default video standard be used to choose which type of files to play back.
The default video standard is only a guide to help the HyperDeck Shuttle HD make decisions about
what to do when it's not sure. It's not an override that forces the deck to behave in any specific way.
Shuttle Max Speed
The maximum shuttle speed on HyperDeck Shuttle HD is x50 speed. If you want to reduce this
speed, you can select from one of the other speed presets.

Date and Time

Setting the date and time correctly ensures your HyperDeck Shuttle has the same time and date
information as your network and also prevents conflicts that can occur with some network systems.
Auto Set Date and Time
To set your date and time automatically select set the auto set date and time option to 'on'.
When setting the date and time automatically, the HyperDeck will use the network time protocol
server set in the NTP field. To override the date and time manually, select 'off'.
NTP
The default NTP server is time.cloudflare.com, but you can also manually enter an alternate
NTP server using HyperDeck Setup. For more information on setting the NTP server, refer to
HyperDeck Setup later in this manual.
Date
To enter the date manually, select the date field and press set. Using the menu dial you can
select the day, month and year.
Time
To adjust the time, select time and press set. Use the menu dial to adjust the hours and minutes.
The internal clock is a 24 hour clock.
Settings 20