Blackmagic Design HyperDeck Shuttle HD Installations- Und Bedienungsanleitung Seite 10

Vorschau ausblenden Andere Handbücher für HyperDeck Shuttle HD:

Inhaltsverzeichnis

Use the forward and backward skip buttons to cue to the start

of each clip

To play back video files on your HyperDeck, you will need to set the codec to

match the codec used to record the files. You can do this using the menu. Refer to the

'changing settings' section later in this manual for more information.

Looping Clips

During playback, pressing the 'play' button again will set your HyperDeck Shuttle to loop

all clips until you press the 'stop' button.

If you want to loop a single clip, set your HyperDeck to 'clip' mode and press the 'play' button

once to play and again to loop.

Loop all clips

During playback, press the 'play' button a second time to loop all recorded clips

Loop current clip

When in clip mode, press the 'play' button a second time to loop the current clip

Clip mode lets you limit playback to a single clip. For example, with clip mode enabled you can

shuttle or skip to a clip and then press play knowing that playback will stop when the clip ends.

When clip mode is selected, pressing play a second time will loop the

current clip

Kapitel

Inhaltsverzeichnis