Plugging In Media - Blackmagic Design Hyperdeck Shuttle Hd Installations- Und Bedienungsanleitung

SD CARD
HDMI OUT
+12V DC
ETHERNET EXT DISK HDMI IN
HDMI
Plug the HDMI output into your destination equipment, such as an HDMI television or ATEM Mini switcher
To connect video to your HyperDeck Shuttle 4K Pro, plug an HDMI or SDI video source into the
HDMI or SDI input on the rear panel.
Once connected, the input will appear on the large touchscreen display.

Plugging in Media

All HyperDeck Shuttle disk recorders ship ready to record immediately without having to
configure any settings. All you need is a formatted SD card or external disk. With HyperDeck
Shuttle 4K Pro 2TB you can start recording right away to the internal storage.
You can easily format media via the menu settings. You can also format using a computer.
Refer to the 'formatting media' section in this manual for more information. You can also
find information about the types of media that are best for recording video and a list of
recommended SD cards and external disks.
Getting Started 7