Blackmagic Design HyperDeck Shuttle HD Installations- Und Bedienungsanleitung Seite 83

To select an active drive from the drive list:
1 Tap the center of the storage icon to open the drive list. The current active drive is
indicated by a blue line to the left of the name.
2 Select a drive from the list, once it is highlighted blue, press use drive. This drive will now
be the active drive. Press exit to return to the previous screen. Once a network location is
added, selected volumes will appear under the drive list.
The blue line on the left hand side indicates which drive is selected.
NOTE Spill recording is available when multiple cards and drives are connected.
Once the SD card is full, recording will spill over to the active USB disk.
Storage Media 83