Blackmagic Design HyperDeck Shuttle HD Installations- Und Bedienungsanleitung Seite 53

Timecode Preset
You can set your time code manually by tapping on the pencil icon and entering the start time
code via the touchscreen keypad.
Timecode Output
Tap on clip or timeline to select your timecode output
Select your timecode options for your SDI outputs.
Timeline Tap the timeline option to output your timeline timecode.
Clip The clip option will output the timecode of your clip.
Setup Page 3
The third page of the setup tab lets you set your network preferences. This can also be set via
the HyperDeck Setup utility. Connecting HyperDeck Shuttle to your network means you can
record directly to a network location, remotely control the unit via HyperDeck Ethernet protocol
or transfer files to and from the unit using an FTP client or the Blackmagic Web Media Manager.
DHCP
To connect to your network via a dynamic IP address, toggle the switch to on. To manually set
a static IP address, toggle it to off.
Settings 53