Playback - Blackmagic Design Hyperdeck Shuttle Hd Installations- Und Bedienungsanleitung

Press the 'record' button on the front panel, or tap the red record icon on the touchscreen. You
can see your HyperDeck Shuttle 4K Pro is recording because the record button will illuminate
red along with the timecode display and media icon. To stop recording, simply press either the
touchscreen or front panel 'stop' button.

Playback

Press the 'play' button to start playback. During playback, the play button will illuminate and
the 'disk' or 'SD' media slot indicator will illuminate green.
If there are multiple clips that have been recorded, you can quickly move through them by
pressing the forward and backward skip buttons.
Using the Skip Buttons
Press the backward skip button to cue the clip at the start. Pressing more than once will move
back through previously recorded clips.
Press the forward skip button to move forward through your clips. The skip buttons will also
flash when the 'identify HyperDeck' checkbox is selected using HyperDeck Setup utility.
MENU SET DISK SD
JOG SCR
CLIP
Playback 9