Blackmagic Design HyperDeck Shuttle HD Installations- Und Bedienungsanleitung Seite 51

Use the arrows to change your date and time
If you are entering your date and time manually, tap the arrows either side of each setting
to select your year, month and day. Repeat the process to set your hour, minute and time
zone. Press update to save the settings. Setting the date and time is important to ensure
your recordings have accurate information. It will also provide the date and time for when the
timestamp file suffix option is selected.
Software
Displays the current software version.
Camera
This setting is helpful when using HyperDeck to record ISO files from multiple cameras and
then editing them on a multicamera timeline in DaVinci Resolve. Camera identifiers can use
characters A to Z and numbers 1 to 20.
Each individual camera ID will appear in the files' metadata, allowing DaVinci Resolve to identify
each angle easily when using the sync bin feature.
Default Standard
Sometimes the HyperDeck Shuttle does not know what video standard you want to use. This
setting will let the HyperDeck know the video standard you want to use most of the time.
A good example is if you have turn on HyperDeck Shuttle, it has no video input connected and
you insert a disk with files on it with 2 different video standards. Which video standard should
the HyperDeck play? The default video standard will give it an indication which video standard
you prefer and it will switch to that standard and play those files.
The default video standard is also useful when you first turn on a HyperDeck, and it has no
video input and no media disk inserted. In this case, HyperDeck Shuttle does not know which
video standard to use for the monitoring output. The default video standard will guide it on
what to do.
However, the default video standard is only a guide. It won't override anything. So if you had a
media disk with only 1 type of video file on it and you press play, HyperDeck Shuttle will switch
to that video standard and play. It will ignore the default video standard because it's obvious
you just want to play the files on the disk.
Settings 51