Blackmagic Design HyperDeck Shuttle HD Installations- Und Bedienungsanleitung Seite 29

Grid
The grid option lets you select overlays to assist with shot framing.
Thirds Thirds will overlay two horizontal and two vertical lines over your image, breaking it up
into 9 smaller sections to help you compose your shot. The human eye typically looks
for action near the points where the lines intersect, so it's helpful to frame key points
of interest in these zones. An actor's eyeline is commonly framed along the top third of
the screen, so you can use the top third to guide your framing.
Crosshairs The 'crosshairs' setting places a crosshair in the center of the frame. Like thirds, the
crosshairs is a very useful compositional tool, making it easy to frame the subject of a
shot in the very center of a frame. This is sometimes used when filming scenes that will
be assembled using very fast cuts. Keeping viewers' eyes focused on the center of a
frame can make rapid editing easier to follow.
Center Dot The 'center dot' setting places a dot in the center of the frame. This works in exactly
the same way as the 'crosshair' setting, albeit with a smaller overlay that you may find
less intrusive.
You can enable a combination of 'thirds' and 'crosshairs' or 'thirds' and 'center dot'
by tapping both options in the 'grids' menu. 'Crosshairs' and 'center dot' cannot be
selected together.
False Color
The 'false color' setting toggles the appearance of false color exposure assistance on the LCD
touchscreen and the monitor out. When false color is on, different colors are superimposed
over your image to represent different exposure levels. For example, optimal exposure for skin
tones can be achieved by using green for dark shades and pink for light shades. Monitoring
the colors during recording can help you maintain consistent exposure for skin tones.
Similarly, when elements in your image change from yellow to red, that means they are now
over exposed.
Using HyperDeck Shuttle 4K Pro 29