Yamaha RD200 1977 Betriebsanleitung Seite 63

[ — C A U T I O N : ,
See " B r e a k - i n s e c t i o n " prior to
operating engine for the first t i m e .
W a r m i n g up
To get maximum engine life, always "warm-
up" the engine before starting off. Never
accelerate hard with a cold engine! To see
whether or not the engine is warm, see if it
responds to throttle normally with the Starter
jet (choke) turned off.
C r u i s i n g
A frequently asked question is "What rpm
should I cruise at?". The BREAK-IN section
provides limitations when the motorcycle is
new, but once the engine has been broken in,
then we suggest that you follow these guide
lines. For sustained load and throttle con-
- 5 3 -