Yamaha RD200 1977 Betriebsanleitung Seite 105

1. Adjusting screw
2. Adjuster lock nut
1. Vis de reglage
2. Ecrou de blocage
1. Einstellschraube
2. Kontermutter des Einstellers
Front brake adjustment
The front brake lever should be so adjusted
that it has a free play of 5 ~ 8 mm (0.2 ~ 0.3
in) from when the brake lever is pulled to
when the adjusting screw is just touched the
master cylinder.
1. Loosen the adjusting screw lock nut at
the brake lever.
2. Turn in the adjusting screw until it lightly
touches the master cylinder, then turn it
out by approx. 3/4 turns (for proper
freeplay).
3. After adjusting, tighten the lock nut.
- 9 5 -