Yamaha RD200 1977 Betriebsanleitung Seite 147

3. Remove spark plug, pour about one
tablespoon of 10W to 30W oil in spark
plug holes and re-install spark plugs.
Kick engine over several times (with
ignition off) to coat cylinder walls with
oil.
4. Remove drive chain. Clean thoroughly
with solvent and lubricate. Re-install
chain or störe in a plastic bag (tie to
frame for safe-keeping).
5. Lubricate all control cables.
6. Block up frame to raise both wheels off
ground. (Main Stands can be used on
machines so equipped.)
7. Deflate tires to 1.0 k g / c m
2
.
- 1 3 7 -