hillvert HT-WBL-01 Bedienungsanleitung Seite 22

Check the material to be shredded and make sure that there is enough space above the machine to load the
material. It is recommended to choose a workplace as close as possible to where the chips are to be used.
This will reduce the need to carry the processed material to a minimum.
Keep a safe distance from the chip discharge area. Make sure that all bystanders, children, animals, or
valuables are also kept at a safe distance from the chip discharge area.
ASSEMBLY OF THE MACHINE
This machine is partially disassembled and packed. After unpacking, the parts are taken out of the packaging
box and simply assembled according to the attached installation diagram before operating. Attention: Some
parts of this machine with large volume and heavy weight. During assembly, it is recommended to seek
guidance and assistance from a seller or someone with considerable knowledge and ability to this machine
to ensure safety.
HT-WBL-01
CAUTION: during installation, do not put hands or any other body parts within a radius of blade rotor; Do not
touch the blades with your hands or any other body parts.
HT-WBL-01
A. Upper part of feed hopper assembly
EN
HT-WBL-02