hillvert HT-WBL-01 Bedienungsanleitung Seite 20

This User Manual has been translated using machine translation. We have made every effort to
ensure the translation is accurate, but please note that automated translations are not perfect
and are not meant to replace human translators. The official version of the User Manual is in
English. Any differences between the translated version and the original English are not legally
binding. If you have any questions about the accuracy of the translation, please refer to the English
version, which is the official reference. More language versions are available upon request via
info@expondo.com
Technical data
Parameter description
Product name
Model
Engine type
Max power [HP]
Max torque [Nm]
Fuel type
Engine oil
Spark plug
Fuel tank capacity [L]
Starter type
Blade max speed [rpm]
Chipping capacity [cm]
Allowable log dimeter [cm]
Dimensions [width x depth x height; mm]
Weight (netto) [kg]
Battery type
1. Use guidelines
The device is designed for processing of wood branches, shrubs, weeds, shoots (with a diameter not
exceeding the value given in the technical data table) into smaller pieces. These machines are powered by a
gasoline engine, making it portable and suitable for outdoor use, especially in areas without access to
electricity and equipped with a hitch for low-speed (≤ 5 km/h) towing outside public roads only.
CAUTION: do not use the machine to shred construction debris, plastic, paper products, ropes or strings, or
any material that may contain metal.
WARNING: remove all nails, ropes, strings, or stones that may be embedded in plant parts (e.g., roots, etc.)
before inserting material into the unit.
The user is liable for any damage resulting from unintended use of the device.
3.1.
Device description
Viscosity
Capacity [L]
Type
Electrode gap [mm]
Tightening torque
[Nm]
EN
Parameter value
Wood branch logger
HT-WBL-01
DH457
Naturally aspirated
1-cylinder OHV 4-stroke
air cooled
457 ccm
Euro 5
18 at 3600 rpm
31 at 2500 rpm
Unleaded gasoline min. 91 octane (RON) ≤E10
Standard ambient working conditions:
API SJ +higher 10W30 (with cleaning additives)
Cold ambient working conditions (not exceeding 0
API SJ +higher 5W30 (with cleaning additives)
1.1
F7TC / F7RTC (or equivalent)
0.6-0.8
18-22
6.5
Recoil / Electric
230
12 (soft fresh branch)
Ø10-30
850 x 2120 x 1410
249
6MF9
GEL 12 V 9 Ah
HT-WBL-02
DH212
Naturally aspirated
1-cylinder OHV 4-stroke
air cooled
212 ccm
Euro 5
7 at 3600 rpm
13.5 at 2500 rpm
o C):
0.6
3.6
240
7 (soft fresh branch)
Ø8-20
640 x 1800 x 1120
112
6MFL
GEL 12 V 9 Ah