Damage And Repairs To The Industrial Truck - Jungheinrich DFG 316s Betriebsanleitung

6. Review, additional training and application
– During the training program, the employer should assess the operator's skills
and knowledge in connection with the stipulated requirements by means of
practical tests, and oral and/or written tests. The employer should establish
appropriate criteria for passing or failing these tests. Employers may delegate
these tests to other employees, but they are still responsible for the tests.
Appropriate records must be kept.
– Operators should receive follow-up training in the event that new equipment is
introduced, existing equipment is modified, operating conditions change, or an
operator performs unsatisfactorily.
– The user is responsible for the safe use of the powered lift truck in accordance
with the regulations cited in this manual.
NOTICE Information about operator training can be obtained from the manufacturers
of (powered) industrial trucks, from official bodies responsible for safety at
work, from industrial truck operators' associations, and from safety
consultants, for example.
4.2

Damage and repairs to the industrial truck

Damage and defects: If damage or defects are found on this industrial truck or
attachments, they must be reported immediately to the responsible person. Where
the safe operation of the industrial truck cannot be guaranteed (due to worn tires or
defective brakes, for example) it must not be used again until it has been repaired in
an appropriate manner.
Repairs: The driver must not repair or modify the industrial truck unless he or she has
received special training and has obtained express approval to do so. Under no
circumstances may the driver change the setting of switches or safety systems or
disable them.
E 50