o
Heat controller
– Turn the thermostat control knob
(41) counterclockwise in order to
slowly lower the cab temperature.
– Turn the air control knob (42)
clockwise to adjust the flow of fan
air. In order to shut it off, turn the air
control
counterclockwise.
– Push the air flow direction lever
(42) as far down as it will go in order
to divert the flow of air onto the cab
floor. Push the air flow direction
lever (43) as far up as it will go in
order to stop the flow of air on the
cab floor. The airflow on the
windshield
independently of this lever by the
air slits in the plastic channels
below the windshield.
Horn
– To activate the horn, push button
(25).
E 12
knob
all
the
is
controlled
way