Maintenance Checklist Tfg - Jungheinrich DFG 316s Betriebsanleitung

6

Maintenance checklist TFG

Engine: 1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
1.10 Check maximum engine speed (unloaded), adjust if
Coolant: 2.1
2.2
Exhaust: 3.1
3.2
Air filter: 4.1
4.2
Hydraulic 5.1
system:
Fueling unit: 6.1
6.2
6.3
6.4
6.5
d) change coolant annually.
Check engine for noise and leaks
Check spark plugs and change if necessary
Check firing point, adjust if necessary
Check ignition distributor setting, adjust if necessary
Check tappet clearance and adjust if necessary
Check engine oil level, correct if necessary
Change engine oil
Replacing engine oil filter
Check V-belt for tension and damage
necessary
Check coolant level, correct if necessary
Check antifreeze content, correct if necessary
Check exhaust system for leaks and damage
Check exhaust values, adjust if necessary
Clean air filter cartridges
Change air filter cartridge
Check the hydraulic pump drive and lubricate
Check fueling unit for leaks and damage
Change fuel filter by trained employee
Check fuel filter by trained employee
A trained employee must check the exhaust contaminant level
and adjust to the lowest possible level.
Check Impco units and perform maintenance
Maintenance intervals
Standard = W A B C
G 11