Jungheinrich DFG 316s Betriebsanleitung Seite 31

Wheels and tires
TIRE SIZE
TIRE PRESSURE
WHEEL NUT TORQUE
Tires
APPLICATION
Drive axle
Steering axle
Drive axle
Steering axle
Drive axle
Steering axle
Drive axle
Steering axle
NOTICE Only tires are allowed, which agree with the original technical data.
Noise
CONTINUOUS SOUND PRESSURE LEVEL
according to EN 12053 in compliance with
ISO 4871.
Vibration
WHOLE BODY VIBRATION MEAN VALUE
according to document EN 13059
Electrical system
SYSTEM
ELECTROMAGNETIC COMPATIBILITY
(EMC)
D 14
Model
DFG/TFG 316s/320s
Model
DFG/TFG 316s/320s
TIRE SIZE
6.50x10 PR
18x7 PR
6.50x10
18x7
23x9x10 PR
18x7 PR
23x9x10
18x7
See performance data
Drive axle
108 psi/7.5 bar
Drive axle
173.3 lbf ft/235 Nm
TYPE
Pneumatic tires diagonal DFG/TFG 316s/320s
Solid tire treaded
Pneumatic tires diagonal DFG/TFG 316s/320s
Solid tire treaded
<80 dB (A)
Cyclopac - dry cell
The continuous sound pressure level is a value
determined in accordance with the standard,
taking into account the sound pressure level
while driving, lifting and at idle. The sound
pressure level is measured at ear level.
1.87 ft/s / 0.57 m/s
The vibration acceleration acting on the body in
the operating position is the linearly integrated,
weighted acceleration in the vertical direction. It
is determined by driving over thresholds at a
constant speed.
12 volt negative grounding
Compliance of the following threshold values in
accordance with the product standards for
"Electromagnetic Compatibility Industrial Trucks
(9/95)":
t Electromagnetic interference (EN 50081-1)
t Interference resistance (EN 50 082-2)
t Electrostatic discharge (EN 61000-4-2)
Steering axle
130 psi/9.0 bar
Steering axle
129.8 lbf ft/176 Nm
MODEL
DFG/TFG 316s/320s
DFG/TFG 316s/320s