Maintenance And Inspection - Jungheinrich DFG 316s Betriebsanleitung

3

Maintenance and inspection

A thorough and professional maintenance service is one of the most important
requirements for the safe use of the industrial truck. Ignoring regular maintenance
intervals can cause the truck to break down and presents a potential danger to
personnel and equipment.
IMPORTANT The specified maintenance intervals assume single-shift operation and
normal working conditions. If the truck is used in very dusty environments or
is exposed to extreme temperature variations in multi-shift operations, the
maintenance intervals must be reduced accordingly.
The maintenance checklist below sets out the jobs to be done and the intervals at
which they are required. The maintenance intervals are defined as follows:
W = Every
A = Every 500 operating hours, or at least once every 6 months
B = Every 1000 operating hours, or at least once a year
C = Every 2000 operating hours, or at least once a year
Z
Maintenance interval W must be performed by the owner.
– When the industrial truck is being broken in - after approx. 100 operating hours -
the owner must check the wheel nuts and wheel bolts, and tighten them if
necessary.
50 operating hours, or at least once a week
G 7