Jungheinrich DFG 316s Betriebsanleitung Seite 103

General: Before starting up the industrial truck, the operator must read "Starting the
vehicle" in Chapter E.
The industrial truck and all its functions or attachments can only be started and used
when the operator is in the driver's seat in the specific operating position.
Hands and feet must remain inside the area provided for the driver or inside the cab.
No part of the body should be outside the cab of the industrial truck.
The wearing of safety shoes is recommended.
Do not place any part of the body in the framework of the lift system or between the
lift system and the industrial truck.
Do not place any part of the body into other attachments on the industrial truck.
Familiarize yourself with the limits of the truck and when using the truck take care to
avoid injuring people. The safety of pedestrians is always the highest priority.
– Never drive the truck up to a person who is standing in front of an object.
– Before turning the truck round, make sure that nobody is standing in range of the
rear of the vehicle.
– Pay particular attention to corridors, passageways or other areas where
pedestrians could cross the travel path of the industrial truck.
Nobody must ever stand or walk under the raised section of an industrial truck,
regardless of whether the truck is laden or unladen.
Passengers must not be carried on a powered industrial truck unless a dedicated seat
is provided by the manufacturer.
Do not allow people to ride on the fork carrier or forks.
When handling loads above the mast, sound decisions and maximum caution are
critical.
In areas classed as potentially hazardous, only industrial trucks approved for these
areas can be used.
The truck must not be modified with additional equipment or in any other way.
Travel ways and working areas: Only travel ways and routes expressly approved
for industrial trucks may be used. Unauthorized third parties must stay away from the
working area. The load must only be stored in the designated places.
E 60