Operating Resources - Jungheinrich DFG 316s Betriebsanleitung

8.2

Operating resources

Working with operating resources:
Operating resources must always be used properly and in accordance with the
manufacturer's instructions.
Qw W
Improper handling can endanger health, life and the environment. Operating
resources must only be stored in suitable containers. They may be flammable
and must, therefore, not be brought into contact with hot components or
naked flames.
Only clean containers should be used to fill operating resources. Different grades of
operating resources should never be mixed. The only exception to this rule is if mixing
is expressly stipulated in this Operating Manual.
Be careful not to spill liquids. Liquid spillages must be removed immediately using a
suitable binder. The mixture of binder and operating resources must be disposed of
in compliance with applicable regulations.
Code Order No.
A 29 200 670
B 29 200 680
C 29 200 810
D 29 200 150
E 29 201 430
F 29 200 100
G 29 201 280
Quantity Fill
quantity:
ca.
1.32 gal
8.72 gal H-LP 46, DIN 51524
(5 l)
(33 l)
1.32 gal 2.50 l
CLP 100, DIN 51517 Transmission
(5 l) (2.5 l)
1.32 gal
H-LP 10, DIN 51524
(5 l)
(1 l) Brake fluid
2.2 lbs
Lubricant, DIN 51825 Lubrication service
(1 kg)
2.2 lbs
Grease, TTF52
(1 kg)
2.2 lbs Chain spray
(400 ml) Tunfluid LT 220
Designation
Hydraulic system
Transmission, hydraulic
system
Brake system
Lubrication service
Chains
Use for
G 15