– Carefully drive into the load until it
rests against the fork back.
Qw W
The forks must be inserted into
the load at least two thirds of
their length.
– Place the direction of travel lever (29)
in the neutral position, and engage the
parking
Position I.
– Lift the fork carrier until the load is held
completely by the fork.
– Switch direction of travel lever into
reverse and release parking brake.
Qw W
Make sure the area to the rear is
clear for traveling.
– Back up carefully and slowly until the
load is outside the storage area.
brake
switch
(31)
on
E 33