Jungheinrich DFG 316s Betriebsanleitung Seite 57

Adjusting the driver seat
NOTICE To achieve optimum seat cushioning, the driver seat must be adjusted to the
driver's weight. When adjusting the driver seat to the driver's weight, the seat
must not be occupied.
Adjusting the weight:
– Pull lever (60) in the direction of the
arrow to its limit and then return it to
the starting point.
NOTE
The previous weight setting is reset to
the minimum value. Seat cushioning
setting range from 110.2 lbs / 50 kg to
286.6 lbs / 130 kg.
– Pull lever (60) again in the direction of
the arrow until the corresponding
weight mark on the scale (61) is
reached. Then return lever to the
original position.
– Sit on the driver seat.
Qw W
When making this adjustment do not reach between the seat and the engine cover.
E 14