Operation Of The Industrial Truck; Driving - Jungheinrich DFG 316s Betriebsanleitung

3

Operation of the industrial truck

3.1

Driving

Qw W
Adapt driving speed to the
circumstances of the running
surface, the work area and the
load!
– Place direction of travel lever (29) in
neutral position.
– Lift fork carrier approximately 7.87
inch / 200 mm so the fork clears the
ground.
– Tilt the lift mast all the way back.
– Release parking brake.
Driving forward
– Shift direction of travel lever (29)
forward.
IMPORTANT Do not switch main switch (27)
into the "Off" position while at
maximum
operating
forcibly braked. (Full braking).
– Slowly actuate the drive pedal (22)
until the desired traveling speed has
been reached.
Changing direction of travel
– Shift direction of travel lever (29)
through the neutral position into the
desired direction of travel.
– Slowly actuate the drive pedal (22)
until the desired traveling speed has
been reached.
speed in normal
mode. Vehicle is
E 27