Load Diagrams - Jungheinrich DFG 316s Betriebsanleitung

4.2

Load diagrams

Fork load diagram (load capacity, load center, lift height)
The fork load diagram (38) indicates the carrying capacity Q of the fork in kg. It is
shown in table form and depends on the load center D (in mm) and the desired mast
height H (in mm). Arrow markings (39 and 40) provided on the inside and outside
masts tell the driver when the mast height thresholds indicated in the load diagram
have been reached.
Example for determining the maximum load capacity:
At a load center D of 23.62 inch / 600 mm and a maximum mast height H of 153.43
inch / 3,900 mm, the maximum load capacity Q is 3,284 lbs / 1,490 kg.
Load diagram (load capacity, load center, lift height)
The side shifter load diagram (41) indicates the carrying capacity Q of the side shifter
in kg. It is displayed in the same format as the fork load capacity and determined
appropriately.
D 26
38
41
39 40