Problem Indications During Operation - Jungheinrich DFG 316s Betriebsanleitung

IMPORTANT Do not allow engine to
warm up while idling. Under
moderate loading and a
changing engine speed, the
engine quickly reaches its
operating
Only load engine fully once
the
temperature indicator (2)
indicates
temperature.
If it was possible to perform all
operational
problem and
temperature has been reached, the vehicle is ready for operation.
2.3 Problem
operation
If the following warning lights come
on:
– engine oil pressure (8),
– charging current (17),
– coolant temperature (3),
– hydrostatic drive (6),
the engine must be shut off
immediately.
IMPORTANT Engine
restarted after the problem
has been remedied.
NOTICE Troubleshooting
corrective measures, see
chapter G, section 17.
During operation, check the fuel
gauge (only 2, CD). DFG
Shutting down
IMPORTANT Do not shut down the
engine while under full load;
instead, let it run for a short
time
temperature.
E 20
temperature.
engine coolant
operating
checks without
the operating
indications during
may only
engine1.
to equilibrate
a
be
and
the