Jungheinrich DFG 316s Betriebsanleitung Seite 79

Setting down loads
– Carefully approach the shelf.
– Place direction of travel lever (29) in
neutral position.
– Place the parking brake switch (31) in
position I.
– Lift the forks to the appropriate height
relative to the shelf.
– Place the lift mast in the vertical
position.
– Switch direction of travel lever into
forward drive and release parking
brake.
– Carefully drive load into the shelf.
– Slowly lower load until the load is
taken off the fork.
IMPORTANT Avoid setting down the load
abruptly to protect the load and
the load-carrying unit.
E 36