Jungheinrich DFG 316s Betriebsanleitung Seite 35

NOTICE Only tires are allowed, which agree with the original technical data.
Noise
CONTINUOUS SOUND PRESSURE LEVEL
according to EN 12053 in compliance with
ISO 4871.
Vibration
WHOLE BODY VIBRATION MEAN VALUE
according to document EN 13059
Electrical system
SYSTEM
ELECTROMAGNETIC COMPATIBILITY
(EMC)
Hydraulic system
HYDRAULIC PUMP
CONTROL VALVE
STEERING PRESSURE
MAIN PRESSURE
TANK CAPACITY
CAPACITY HYDRAULIC SYSTEM
Usage conditions
AMBIENT TEMPERATURE
t during operation
NOTICE When using the lift truck at temperatures below 32°F / 0
recommended to fill the hydraulic system with frost-resistant fluid according
to the manufacturer's information. For the use in refrigerated warehouses or
under extreme temperature and humidity fluctuations, special equipment and
approval for industrial trucks are required.
D 18
<80 dB (A)
The continuous sound pressure level is a value
determined in accordance with the standard,
taking into account the sound pressure level
while driving, lifting and at idle The sound
pressure level is measured at ear level.
2.36 in / 0.72 m/s
The vibration acceleration acting on the body in
the operating position is the linearly integrated,
weighted acceleration in the vertical direction. It
is determined by driving over thresholds at a
constant speed.
12 volt negative grounding
Compliance of the following threshold values in
accordance with the product standards for
"Electromagnetic Compatibility Industrial Trucks
(9/95)":
t Electromagnetic interference (EN 50081-1)
t Interference resistance (EN 50 082-2)
t Electrostatic discharge (EN 61000-4-2)
1PX series
5000 series
1305.3 psi/90 bar
3118.3 psi/215 bar
14 US-gal/53 liters
15.3 US-gal/58 liters
°
5°F to 104°F/-15 C to +40
°
C
°
C, it is