Jungheinrich DFG 316s Betriebsanleitung Seite 45

1.2 Description of controls and indicators
Item
1
2
3
4
5
6
7
8
9
10
E 2
Control or
indicator
Warning light
Parking brake
Fuel gauge (DFG)
Coolant temperature
gauge
Neutral position
Not used on
hydrostatic forklifts
Warning lamp for
hydrostatic drive
Light
Warning light – engine
oil pressure
Unoccupied
Unoccupied
Function
t
Indicates when lit up that the parking
brake is set.
t
Indicates how much fuel is still in the
tank
t
Indicates the coolant temperature
t
Indicates when lit that the
direction of travel switch is in the
neutral position.
o
o
The lamp is continuously lit
if the ignition is ON. If everything is
normal when the engine is started, the
lamp goes out.
A slow flashing indicates a
minor error on the hydrostatic
drive, such as drive pedal
potentiometer, mast lever or engine
control element.
Rapid flashing indicates a serious
error on the hydrostatic drive (vehicle
is forcibly braked), such as pump
potentiometer, brake pedal, and error
in the 5-volt circuit.
A continuously lit lamp while driving
indicates an error in the engine speed
sensor.
o
Indicates that the front headlights are
on.
t
Indicates when lit that the
engine lubricating oil pressure is too
low.
o
o