Fissler vitaquick Gebrauchs- Und Pflegehinweise Seite 25

EN
Problem Possible cause
Steam is escaping
The pressure regulator is not
from the pressure screwed on properly and
regulator.
tightly.
The O-ring, valve seat seal or
rolling diaphragm is missing,
defective or incorrectly fitted.
Steam is escaping
The lid handle is loose.
from under the
lid handle (on the
Euromatic) even
though the cooking The flat gasket for the lid
indicator has already
handle fastening screw or
risen. the O-ring for the Euromatic
is missing, defective or
incorrectly fitted.
If a large amount of steam
escapes, the Euromatic may
have responded as a safety
device. This happens when the
pressure regulator is dirty or
defective.
The lid handle is
The fastening screw is not
loose. tightened firmly.
The handles on the The handle screws are not
pot are loose.
firmly tightened.
A lot of steam is
The sealing ring is defective.
escaping from the
edge of the lid even
though the cooking
The sealing ring has
indicator has already responded as a safety device.
risen.
This happens when the
cooking valve and Euromatic
are dirty or defective.
44
Remedy
Insert pressure regulator
correctly and tighten the
fastening screw.
(See chapter 8)
Replace or correctly mount the
affected seal. (See chapter 9)
Tighten the fastening screw on
the lid handle on the inside of
the lid.
Replace or correctly mount the
affected seal. (See chapter 9)
Remove and clean or replace
the pressure regulator.
(See chapter 8)
Tighten the fastening screw on
the lid handle on the inside of
the lid.
Tighten the screws with a
screwdriver.
Replace the sealing ring.
(See chapter 9)
Have the device checked by
Fissler customer service.
Problem Possible cause
Steam is escaping A seal is defective.
from under the
round cover cap on
the lid handle or on
the control button.
The pot is difficult to
Lid handle and/or pot handle
close or the control are not fitted correctly.
button does not pop
out when closing.
The lid handle is defective.
The sealing ring is not inserted
correctly.
The pot is not closed properly.
(Indicator in the lid handle is
on red).
The pot cannot be The pot is still under pressure.
opened.
The Euromatic has jammed.
EN
DE
Remedy
EN
Replace the lid handle or have
FR
it checked by Fissler customer
service.
ES
IT
Check the fastening of
NL
the handles and tighten if
necessary.
RU
Replace the lid handle.
GR
Insert the sealing ring
TR
correctly. (See chapter 5)
KO
Close the pot properly.
(See chapter 4) (Indicator in
ZH
the lid handle is on green)
JA
Release the pressure in the
pot. (See chapter 7)
PL
Let go of the control button.
CZ
Push the lid handle slightly to
the left.
SR
HR
HU
SK
SL
RO
BL
AR
45