Checking The Fuel Filter; Control System; Adjusting The Shift Cable - Yamaha F40BMHD Wartungshandbuch

CHK
FUEL SYSTEM/CONTROL SYSTEM
ADJ
c
2
1
3
8.0 mm (0.31 in)
3-3

CHECKING THE FUEL FILTER

Check:
• Fuel filter
Clogs/cracks/leaks → Replace.
Refer to "FUEL JOINT , FUEL FILTER,
AND FUEL PUMP" on page 4-2.

CONTROL SYSTEM

ADJUSTING THE SHIFT CABLE

1. Check:
• Shift operation
Incorrect → Adjust.
2. Adjust:
• Shift cable length
Adjustment steps
(1) Disconnect the shift cable joint
(2) Set the remote control lever to the neu-
tral position.
(3) Set the shift to the neutral position.
(4) Adjust the position of the shift cable
joint until its hole aligns with the set
c
pin .
(5) Install the clip
3
nut .
CAUTION:
The shift cable joint must be screwed in
more than 8.0 mm (0.31 in).
1
.
2
and tighten the lock-
E