Siemens SIPROTEC Compact 7SC80 Handbuch Seite 112

Funktionen
2.2 Überstromzeitschutz
Adr. Parameter
1283 51-4 ANSI Curve
1284 51-4 Rec. Curve
1285 51-1 Min O. T
1286 51-2 Min O. T
1287 51-3 Min O. T
1288 51-4 Min O. T
1289 Ip> Rec-Kennl.2
112
C Einstellmöglichkeiten
Nein
Very inverse
Inverse
Short inverse
Long inverse
Moderately inv.
Extremely inv.
Definite inv.
Nein
Kurve 101 (A)
Kurve 102 (1)
Kurve 103 (17)
Kurve 104 (N)
Kurve 105 (R)
Kurve 106 (4)
Kurve 107 (L)
Kurve 111 (8*)
Kurve 112 (15)
Kurve 113 (8)
Kurve 114 (5)
Kurve 115 (P)
Kurve 116 (D)
Kurve 117 (B)
Kurve 118 (M)
Kurve 119 (14)
Kurve 120 (Y)
0.00 .. 30.00 s
0.00 .. 30.00 s
0.00 .. 30.00 s
0.00 .. 30.00 s
Nein
Kurve 121 (G)
Kurve 122 (H)
Kurve 131 (9)
Kurve 132 (E)
Kurve 133 (C)
Kurve 134 (Z)
Kurve 135 (2)
Kurve 136 (6)
Kurve 137 (V)
Kurve 138 (W)
Kurve 139 (16)
Kurve 140 (3)
Kurve 141 (11)
Kurve 142 (13)
Kurve 151 (18)
Kurve 152 (7)
Kurve 161 (T)
Voreinstellung Erläuterung
Nein 51-4 ANSI Curve
Nein 51-4 Recloser Curve
0.01 s Min Operating Time 51-1
0.01 s Min Operating Time 51-2
0.01 s Min Operating Time 51-3
0.01 s Min Operating Time 51-4
Nein Ip> Recloser-Kennlinie 2
SIPROTEC Compact, 7SC80, Handbuch
E50417-G1100-C486-B2, Ausgabe 09.2018