Maintenance, cleaning and disinfection
Replacing the front direction indicator
To change the lamp of the front direction indicator, proceed
as follows:
1. Open the front direction indicator by inserting a narrow
flat screwdriver into the recess on the direction indicator
housing and tipping the pane down.
2. Remove the pane.
3. Slightly rotate the bulb to release it from the lock on the
lamp socket and pull it out (see fig. 46).
4. For mounting, slide the bulb in and rotate it into the lock.
5. Insert the lamp socket into the housing and lock the pane
in place.
Fig. 46
Replacing the direction indicator lamp
204 | Ottobock
Downloaded from
www.Manualslib.com
manuals search engine
Replacing the rear LED light (including rear direction in-
dicator)
The rear LED light is maintenance-free. If repairs are re-
quired, the qualified personnel who fitted the wheelchair can
help.
9.5
Cleaning and care
NOTICE
Risk of damage to electronics due to water penetra-
tion. In order to avoid malfunctions, the electronic compo-
nents, motors and batteries must not come into contact
with water when cleaning the power wheelchair.
NOTICE
Risk of damage to power wheelchair components. Do
not use any aggressive cleansing agents, solvents or hard
brushes for cleaning the power wheelchair. The power
wheelchair must never be cleaned using a water jet or
high-pressure cleaning apparatus.
INFORMATION
Prior to disinfection, clean the supports, seat cushion and
back upholstery as well as the control panel and armrest.
Xeno