Herunterladen Inhalt Inhalt Diese Seite drucken

Ottobock Xeno Gebrauchsanweisung Seite 173

Vorschau ausblenden Andere Handbücher für Xeno:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

„ When the stand-up device or the seat tilt/back angle
adjustment is activated, only drive for short distances
at home. Always use the speed level 1 for this. Note
that the field of vision is limited when driving.
„ Slightly tilt the seat to the rear when driving forwards
down inclines or over obstacles (e.g. curbs) and re-
duce the speed.
„ Use the stand-up device and the seat tilt only on firm,
level ground.
„ Driving on inclines and slopes is permitted under ISO
7176-1 and 7176-2 with lowered stand-up device and
lowered seat tilt up to max. 6° (10 %).
WARNING
Risk of pinching or crushing in the electric seat adjust-
ment area.
„ Note that when electric seat options are used, inherent
pinch and shear points are located between the seat
frame and the power wheelchair frame.
„ Ensure that no body parts, such as hands or feet, are
in the danger area while electric seat options are used.
„ Ensure that no interfering objects, such as clothing or
other obstacles, are in the danger area while electric
seat options are used.
Xeno
Downloaded from
www.Manualslib.com
manuals search engine
WARNING
Risk of pinching or crushing when actuators are over-
loaded. Avoid overloading the actuators. Overloading
may cause the spindle nut to break, causing the seat to
sag or the backrest to flip back suddenly.
NOTICE
Damage due to improper use of the electric seat op-
tions.
„ When using electric seat options, note that the seat
function actuators are not designed for continuous
use, only for short-term use under limited loads (10 %
load, 90 % idle time).
„ Observe the following guidelines: at maximum load
capacity, 10 seconds of activation time must be fol-
lowed by approx. 90 seconds of idle time. The electric
seat functions are considered independently of the
driving function for this purpose.
„ Only activate the electric seat functions if no fault or
error is present.
INFORMATION
Bring the seat to a level position when getting into or out of
the power wheelchair.
Operation
Ottobock
173
|

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis