Product Description - Ottobock Xeno Gebrauchsanweisung

3

Product description

The Xeno power wheelchair is suitable for indoor and out-
door use. It is compactly designed and easy to manoeuvre
for use indoors. Two 12-V-batteries power its high-perform-
ance drive system, which makes it possible, along with
spring-mounted drive wheels, to overcome obstacles (cate-
gory B of EN 12184) and to ensure safe operation.
The power wheelchair is controlled by the enAble50 wheel-
chair control unit. It includes a control panel to enter driving
commands and display the current status as well as a con-
troller that controls the drive motors and other electrical
functions based on the input data. Data transmission is real-
ised via a bus system.
The enAble50 control is programmable so that the control
can be adjusted to the individual user requirements. The
speed, acceleration and delay values, for example, can be
adjusted.
The two caster wheels are controlled by separate steering
motors. This considerably improves the driving characteris-
tics, especially on uneven terrain or at higher speeds.
Xeno
Downloaded from www.Manualslib.com manuals search engine
The special features of the power wheelchair include:
„ Stand-up function that enables the user to assume a
standing position.
„ Easy servicing due to good and clear accessibility of all
component groups
„ Customisation with options and custom fabrication using
modular components.
The modular design allows the power wheelchair to be
equipped with further modules and installed equipment in
addition to the main components (see fig. 1), e.g. special
controls. These options are described in section 7.
Product description
Ottobock 137
|