Ottobock Xeno Gebrauchsanweisung Seite 181

LED
Red is flashing
Green is flashing
Red/Orange/Green
flashing alternately
Tab. 6 Display of battery charge level
Mode button (item 3)
Switch between speed level 1 and 2 by pressing the button
briefly.
Push and hold the button (at least 2 seconds) to switch the
control unit to the electric seat functions.
Mode LED (item 4)
The Mode LED indicates the speed level status and system
faults using 3 colour LEDs and various flash codes:
LED
Green is lit
Orange is lit
Xeno
Downloaded from www.Manualslib.com
Status
Battery deep discharge –
Charge as soon as possible
Battery over-voltage
(e.g. after driving downhill) –
Continue driving slowly
Charging process /
Drive-away lock
Status
Speed level 1
Speed level 2
manuals search engine
LED
Red – flashing
1x/2x/3x/4x/5x
Off
Tab. 7 Display of the speed levels / system faults
Display of the selected electric seat function (item 5)
The electric seat functions are accessed by pressing and
holding the "M" button (approx. 2 seconds).
The currently selected seat function is indicated on the con-
trol panel display (see section 6.3.6) and by the following
LEDs on the attendant control:
LED
Accessories
Status
Fault (see section 8.2.2)
LED display switched to
seat function
Information
Electric back angle adjust-
ment
Electric seat tilt
Ottobock
|
181