Ottobock Xeno Gebrauchsanweisung Seite 133

INFORMATION
After each emergency stop, the controls of the power
wheelchair must be turned on again. In the event of com-
munication problems in the bus system of the controls, the
system triggers an emergency stop and thus prevents any
uncontrolled functions. If the driving function is still not avail-
able after switching the controls on again, unlock the
brakes to activate the push mode. In this case, contact a
specialist dealer as soon as possible.
INFORMATION
In case of higher temperatures and longer uphill drives, the
controls of the power wheelchair switch to a safe condition,
and the output of the power wheelchair is limited. However,
it remains possible for the user at any time to drive the
wheelchair out of a dangerous situation. Once the excess
temperature has decreased sufficiently (this can take a few
minutes depending on the outside temperature), the power
wheelchair is fully ready for operation again.
Xeno
Downloaded from www.Manualslib.com manuals search engine
Safety instructions
Ottobock 133
|