Switching On And Off; Lcd Display With All Symbols - Ottobock Xeno Gebrauchsanweisung

LCD display
The LCD display is the communication interface between
the user and the control unit. It indicates the selected speed
level, the remaining battery capacity, the status of electric
options and special functions as well as warnings and er-
rors. During the start phase, all display symbols are visible.
Fig. 22

LCD display with all symbols

1 Direction indicator, left
2 Battery charge level
3 Electric backrest
4 Electric seat tilt
5 Control panel
6 Drive-away lock
7 Speed level
8 Open end wrench
Xeno
Downloaded from www.Manualslib.com
9 Excess temperature
10 Direction indicator, right
11 Drive wheel brake
12 Warning
13 Creep speed
14 Power module
15 Drive motor
16 Light
manuals search engine

6.3.2 Switching on and off

WARNING
Risk of death due to lack of brake functionality. The
brake release lever must be locked when using the power
wheelchair. The automatic brakes must be operational
and functional.
CAUTION
Risk of accidents due to incorrect tyre pressure. Visually
inspect the tyres of the power wheelchair for sufficient tread
depth and sufficient tyre pressure before each use. Incor-
rect tyre pressure reduces the life of the tyres and impairs
the driving characteristics.
The control unit of the power wheelchair is switched on and
off by pressing the on/off button (see fig. 21, item 5). If the
control is not used for a certain time, which is adjustable,
the wheelchair is switched off automatically. It is also possi-
ble to switch off the power wheelchair with the on/off button
during driving. In this case, the wheelchair brakes immedi-
ately until it stops.
Operation
Ottobock 157
|