2X Adapter Cable For Piko Button - Ottobock Xeno Gebrauchsanweisung

Fig. 37 Push-button module
1 Controllable electrical functions
2 Mode button "Function selection"
3 LED indicator "Selected function"
4 Up/down buttons (observe information box)
5 Jack plug for connection of Piko buttons
Xeno
Downloaded from www.Manualslib.com
1
2
3
4
5
manuals search engine
7.5

2x adapter cable for Piko button

The power wheelchair may be equipped with a 2x adapter
cable. The respective connected Piko button may be used
to control electrical seat functions. The functions to be con-
trolled are specified when the power wheelchair is ordered.
Your specialist dealer can change the assignment of the
button using a handheld programming device or program-
ming station.
The buttons are equipped with a so-called toggle function.
This means that the selected function is activated as long as
the button is pressed.
Pressing the button again activates the selected function in
the opposite direction. For example, if the electric backrest
function is activated, the backrest moves back as long as
the button is pushed the first time the button is activated.
Activating this function again causes the backrest to move
forward as long as the button is pushed.
Accessories
Ottobock 187
|