Other Optional Add-On Components - Ottobock Xeno Gebrauchsanweisung

Applying the comfort knee pad
1. Pull out the comfort knee pad.
2. Position the legs of the user on the footplate.
3. Insert the comfort knee pad.
4. Fold the locking lever forward to apply tension. Do not
over-tighten. There should be a small amount of space
(approximately one finger width) between the knee pad
support and lower leg.
2
Fig. 40 Comfort knee pad
1 Knee pad supports
2 Locking lever
Xeno
Downloaded from www.Manualslib.com manuals search engine

7.6.5 Other optional add-on components

„ Luggage carrier
„ Puncture resistant tyres: solid rubber tyres
„ Armrest accessories: special adapter for the armrests of
our wheelchair accessories catalogue
„ Attendant control: external joystick on the backrest
„ Joystick accessories: fork for tetraplegics, STICK S80,
soft ball, golf ball, flexible control stick shaft
„ Protective bow for control panel: metal bow for protect-
ing the control panel against shocks and damage
„ Tray: attachable tray top
„ Pocket for mobile phone
1
These and other optional add-on components are included
in the order form and in the accessories catalogue.
INFORMATION
A rear cover can only be mounted in combination with the
optional lighting.
Accessories
Ottobock 189
|